Es | En

Contacto: 01-800-21-MECAL

APLICADORES - MSEP

Aplicador - MSEP

DESCRIPCIÓN

Two-post crimping die for big linked terminals rolled over a reel to be unrolled « left to right », with material thickness above 1.5 mm., wire section up to 75 mm². Terminal pitch not binding.Continuous crimping height adjusting system. Pneumatic « side-feed » feeding system. All the wearing parts can be replaced without removing the applicator from the press. Can be fitted to any crimping press having a crimping height (measured from the die mounting plate to the press coupling when at Bottom Dead Center) of 212mm (see Mecal Press P104). It is supplied with a complete technical documentation containing all the information needed to safely use and correctly maintain the equipment. Upon request, a capability study (including a picture of a sectioned crimped terminal)) can be performed. Cycle counter non available.



ID

MSEP S  

  CRIMPING HEIGHT

212mm (8.35")  

  STROKE

50mm (1.968")  

  TERMINAL PITCH

not binding  

  TERMINAL THICKNESS

> 1,5mm (> 0,059")  

  WIRE SECTION

max 75mm²  

  FEEDING SYSTEM

air pressure 5/6 Bar  

  WEIGHT

17,0Kg (37,4lb)  

  DIMENSION mm

W450xH210xD157  

  DIMENSION (")

17.7"x8.26"x5.9"