APLICADORES - MSMP/MFMP
Aplicador - MSMP/MFMP
MSMP two post die is an absolute new entry into the Mecal produts range. It can crimp terminals in carrier strip, with left-to-right feeding, and it has some new features compared to the existing two post dies. The upper plate is lighter and it's equipped with a continuous regulation head (0,05mm), which allows a precise control on the conductor crimping height, whereas the insulation crimping can be set up by a new system placed on the front side of the die. This system is easily adjustable by a screw. The movement of the plate has been improved by means of two recirculating ball bushings. The MSMP is also equipped with a non-resettable 7 digits piece counter. Suitable presses for the MSMP are the P40 or P80, with the crimp force analyzer CFA/CPM designed by Mecal.
|
ID |
MSMP |
|
CRIMPING HEIGHT |
|
|
STROKE |
50mm (1.97") |
|
TERMINAL PITCH |
not binding |
|
TERMINAL THICKNESS |
1,2 to 1,5mm (0.047" to 0.059") |
|
WIRE SECTION |
max 25mm² |
|
FEEDING SYSTEM |
air pipe Ø4mm, 5/6 Bar |
|
WEIGHT |
17Kg (37.4lb) |
|
DIMENSION mm |
W510xH210xD190 |
|
DIMENSION (") |
20.1"x8.3"x7.5" |
|
CRIMP HEIGHT ADJUSTMENT: |
4 pads "H" head |
