ACCESORIOS - CFM MX10
Accesorio - CFM MX10
The
CFM MX 10 sensor is installed on crimping presses to measure the crimping
force. The piezo strain sensor mounted on the press frame reads the crimping
force which will then be evaluated in the control unit. To decide whether a
good or bad crimp is being produced, the CFM MX10 "learns" the
characteristics of a "good" crimp by a teach-in procedure before
production is started.
The
characteristics of a "good" crimp are visualized as a reference force
curve, tolerance limits have to be set. During production the force curve of
every crimp is being compared with the reference curve. Whilst the crimp force
measured is within the tolerance limits, all crimps are classified as
"good". If the crimp force is out of the tolerances set, the control
unit gives alarm at the LED display, alarm sound beeps and a stop signal
(relay) or an eject signal (pulse) is generated.
|
ID |
CFM MX10 |
|
APPLICATIONS |
P120,P200 Presses |
|
DIMENSIONS mm |
W288xH72xD220 |
|
DIMENSIONS (") |
W11,34"xH2,83"xD8,66" |
|
WEIGHT |
2,2 Kg (4,85 lb) |
|
POWER SOURCE |
100- 240 VAC 50/60 Hz |
|
DATA INTERFACE |
RS2 |
Performance
Features:
· Easily
adaptable to most types of manual presses, semi-automatic stripper crimper
machines and automatic wire processing machines
·
High
accuracy, 300 readings per crimp, 256 gain levels
·
Automatic
trigger system, no rotary encoders or prox. sensors required
·
Simple
T1, T2, T3 & TD analysis tools
·
Many
output signals available for sorting, machine stopping, short wire cutting
during teach-in, chopper interfaces, etc.
·
BBMX
network allows up to 32 MX systems to be daisy-chained together via RS485
·
All
critical functions can be protected from unauthorized use by either using a code
word or a security dongle
·
The
use of approved components secures a reliable function and low maintenance cost
The
following defects are detected safely:
·
Strands
out
·
Insulation
in core crimp
·
High
insulation
·
Low
conductor
·
Insulation
barrel bent in or outside
·
Inappropriate
wire gauge
·
Tooling
damages or misadjustment