Es | En

Contacto: 01-800-21-MECAL

EQUIPOS - Step 5 CR010

HSD_(High Speed Data) - Step 5 CR010

DESCRIPCIÓN

The crimping station is the 5th step in the Mecal production line for HSD (High Speed Data) cables. It is made up of a combination of two P107C presses, two special applicators, and a transfer table equipped with a variable inclination arm. The machine carries out crimping on 4 HSD cable conductors and, thanks to the two presses and the changing of the 4 applicators, allows for the application of male and female pins. The electronic equipment allows the user to choose different working configurations depending on the type of wiring to be created. Process quality is controlled by means of fibre optics which ensure correct cable positioning, reading the colours of conductors, and by two load cells present on the presses that monitor each individual crimping. The station is equipped with a pneumatic casing that allows the operator to insert cables, but completely closes the working area after activation of the two-handed cycle start switch.



ID

CR010  

  AIR PRESSURE

5-7 BAR  

  AIR CONSUMPTION

0,51 dm³/min x ciclo  

  DIMENSIONS (mm)

W2400xH1300xD1050  

  DIMENSIONS ("")

W94.48xH81.18xD40.94  

  WEIGHT

500 Kg  

  POWER SUPPLY

110-240V 50-60Hz  

  CABLE CROSS SECTION

HSD different section 

  90° CYCLE TIME

approx. 20 sec  

 180° male or female CYCLE TIME

 approx. 19 sec

 180° male and female CYCLE TIME

 approx. 40 sec